John Deere F935 Mower -Excellent Condition

Lawn Mower Admin — Thu, 25 Jun 2009 23:37:21 +0000

John Deere F935 Mower - Runs on Diesel - Front Mower
Has 60″ Commercial Mower Deck that is in Excellent Condition!
With Yanmar 22 HP 3 Cylinder in-line, valve-in head Diesel Engine that runs Great!

Engine ID#CH3029D034850
Model #3TNA72UJ
Manufactured by Yanmar Diesel Engine Ltd. Osaka Japan.
Hydrostatic transmission.
Mower has clocked 907.2 hours of use.

John Deere Lawn Mower LX 277 - No Reserve

Lawn Mower Admin — Mon, 06 Apr 2009 18:45:13 +0000

Item Specifics - Riding Mowers
Condition:Used

Item Specifics - Tractors
Make: John Deere
Serial Number:MOL277C025178
Fuel: Gas

Model: LX277
Engine Cylinders:2

Model Year:2000
Engine HP: 17

Hours: N/A
Transmission:Hydrostatic

Drive:2WD
Condition: Used

LIKE new John Deere LX277 Lawn tractor.
17 hp v-twin kawasaki air cooled engine.
Used very little and everything works perfectly.
I have the mulching kit for the mower deck.
Recently replaced the battery and blades.

Discover John Deere F935 72″ Commercial Riding Lawn Mower

Lawn Mower Admin — Fri, 07 Nov 2008 14:51:24 +0000

****NO RESERVE AUCTION*****

A must see mower equipped with 72″ Deck with Hydraulic lift and John Deere Diesel Engine.

Cub Cadet AGS2160 48″ Lawn Mower W/ 38″ Snowblower

Lawn Mower Admin — Fri, 07 Nov 2008 10:31:23 +0000

Cub Cadet AGS 2160 Lawn mower w/ 38″ snowblower & 48″ mower deckt.

* ** NO RESERVE AUCTION ***

* This mower has 205 hours on it.
* Made in the Year: 1995
* Twin Cylinder Gasoline engine
* Automatic Gear System
* Measures: 6′L x 52″W x 45″H
* Weight: 1200 Pounds
* Has 38″ Two Stage Blower
The engine runs well and does not smoke, the transmission is smooth.
Snow blower and mower work well.

How Do I replace a belt on a cub cadet lawn mower?

Lawn Mower Admin — Thu, 11 Sep 2008 21:48:33 +0000

1.Turn Off the Cub Cadet Lawn Mower
2.Remove/Disconnect the Spark Plug from the lawn mower engine

3.Check if the belt has any tensioner or if some adjustment on the mower is keeping the belt tight?
If yes,release the tension on the belt.

4.Start working the belt so that part of it is worked over the edge of the pulley and slowly turn the pulley simultaneously,so the belt will come off the pulley.

Check the part(belt) and size number and make sure the new belt is same as the old belt and is suitable for Cub Cadet Lawn Mower.
You can also physically compare the old and new belts…the old belt should be slightly larger than the new one.

5.Reverse Step 4 shown above…so that the belt slowly slides over the pulley and into its place

If the new belt slips on the Cub Cadet Lawn mower easily,make slight adjustment to the tension to tighten up the belt.